Flip Flop

For the second obstruction I've had more trouble grasping to idea of the project. I understand we are to take an attribute of the house and do the opposite of it, which I understand. But it was difficult for me to think through what exactly those things are, and what exactly the opposite is. So over the past few days I've been trying to really think of what parts of Villa Meyer are the most important and how to flip them. Here's what I've come up with.

1. Load bearing walls -> Pilotis

2. Ribbon/horizontal windows -> Punched out/vertical windows

3. Geometric -> Non-geometric/random

4. Interior Stairs -> Exterior stairs

5. Roof Garden -> Interior/Enclosed Garden (No roof access)

I'm not sure if this list may change between now and Tuesday, but I think for the most part it will stay the same. The only possible change in it that I see is number 3 that may be replaced with the void space that is produced in Villa Meyer that starts in the facade and moves to the interior double height space. This was discussed during our group desk crits on Friday, which I was behind with the models so I didn't get a full benefit from the crit so I have extra work to do before Tuesday. Therefore, 3 would then become the following: 

3. Void -> Solid 

Which could be very interesting and have an element of changing the geometry of the design anyways. Another way I also really plan to explore is how I can turn the plan of Villa Meyer into the section of this obstruction. Talking with Luis on Friday about that drew my interest in exploring that further. 

Drawings

So after today, I feel I have worked out a very good way to present my drawings for the final. I also promised updated plans so here those are.

I have also taken a floor off of my building, before I had two roof terrace floors to accommodate for a pool. However, I worked around that to combine them and simply have one roof terrace/garden. I also made the building a solid rectangle, rather than having the previous cutout in front of the stairs. I have to show the ribbon windows on the left walls, but I will fix that for my final presentation. Speaking of final presentation lets look at what I have laid out for that. 

Apologies for the yellow, but I used a color that could easily be written over, which Dr. Carranza took advantage of that during crit today. So for my presentation I'm pretty much going to be working from an axon in the middle sheet. moving elevations and presenting sections from those pieces. I plan on having the three sheets kind of step, as my building is so tall, making the drawings "grow" as they go. I'm going to experiment with ways to collage the main axon to indicate the 4 mains points of architecture that Le Corbusier incorporated in the Villa Meyer. 

I'm very excited to get started on these drawings!

Let's slim it down a little more

From Wednesday to today I was tasked with combining my two previous versions of the project that I proposed on Wednesday. So I had to combine an idea of having a 20 ft x 20 ft box that was about 7 stories high with a 12 ft x 75 ft long design that was about 4 and half floors high. My combination evolved to an 18 ft x 35 ft long design.
Here's my new design.

Excuse my plans, they're to be redraw and I will update them.

But after crit, the biggest changes to be made to my design are the cut out corner in front of the stairs is going to become flush, making the building a full rectangle. And then the difficultly I have had with just how to program a floor. For example, the rooms I laid out on the third, fourth, and fifth floor could be arranged to make the floor layout work much better. It would also improve circulation, so I think I will be changing those to keep the room more so on the side opposite to stairs. Leaving probably about a 6-10 foot space between the stairs and the bedroom wall for circulation to flow through.

Cutting it in Half

After Friday's class and being tasked with putting our houses "on a diet" I started exploring ways I could work with my house in half of it's width.
My house is more or less a square approx. 60 ft x 60 ft. I put it on a diet, turning my three ideas into a 30 ft x 60 ft house. I worked with different ways of circulation that would allow me to keep the 4 mains points of Le Corbusier's architecture concepts prominent in my house. I think my hardest part so far has been keeping and open floor plan, and trying to work with varying double height spaces.

Above is my three different variations. Personally, of the three I think the model on the right so far has turned out to be most successful. I have the circulation core in the middle that allows for me to be able to play around with the double height spaces on either side. It also allows for a nice flow of traffic around the center core.

Overall though, from the start of looking into the Slim (fast) house I think this has helped me, to better understand Villa Meyer still. More so now in what exactly Le Corbusier was trying to portray in Villa Meyer and what he did what he did. Though I'll never know exactly the right reasons as to why he made all of his decisions for Villa Meyer, like a pool on the roof. Trying to embody what he did in another project keeps me more conscious of the decisions I'm making, as I keep asking myself "Is this something Le Corbusier would do?" Though I don't need to make everything a way Le Corbusier would, I am trying to make my obstruction in a way that it can be recognized/related to the work of Le Corbusier.

A project to a project

After this first week of looking at my assigned house, Villa Meyer, I have learned a lot. The biggest thing is that the villa was never build. It was simply a project that was designed but then decided it would never been built by the client. Researching this project is the first time I've had to complete a precedent study on a project, that is just that, a project. I personally like the challenge of having to figure out what exactly Le Corbusier wanted in the this villa. It forces me to look back at my plans and sections basically whenever I start to work look at my project. I've understood the drawings I have of the project but it's hard to really remember how everything works from one day to the next because it is not something I've decided. But like I previously said, I like the challenge and that this project is really making me look back at all the details.

Like today in class when talking with Luis, he brought up Villa Stein that was somewhat of a precedent for Villa Meyer. I had come across the Villa Stein when I would google Villa Meyer, but did not think much of it. I thought more that since Villa Meyer is only a project maybe Google just added other projects with the word Villa. Though that was not the case because when actually looking at some of the drawings of Villa Stein it showed a language that was present in Villa Meyer with it's double story spaces on the facade of the building, making it a very open facade. From now on I will certainly be looking more at other places that come up when I search a particular project.


Unfortunately, since Villa Meyer is only a project there are not many for of documentation on it. So I have not been able to find a video on my project, but I am going to put a link to one of the first sites I found. This site provides several drawings of the project along with a letter to Madame Meyer from Le Corbusier explaining what he wanted to portray in this house.

https://translate.google.com/translate?hl=en&sl=fr&u=http://fondationlecorbusier.fr/corbuweb/morpheus.aspx%3FsysId%3D13%26IrisObjectId%3D6402%26sysLanguage%3Den-en%26itemPos%3D207%26itemSort%3Den-en_sort_string1%2520%26itemCount%3D216%26sysParentName%3D%26sysParentId%3D65&prev=search

The webpage isn't the best because it's through Google translate, but it's worth the read.